Aluminium Doors Comar 7

Comar 7 is the specifier and installer preferred aluminium commercial door system throughout the UK. The extensive profile range designed specifically for fabricators and bespoke projects provides combinations such as:

  • Swing Door
  • Sliding Doors
  • Sliding/Folding Doors
  • Rebated Doors
  • Pivot Doors
  • Armoured Glass - A.G. Doors
  • Automatic Sliding Door Options
  • Thermally Broken P.i. Doors

Three ranges are available: standard, high performance and 7Pi polyamide doors. 7Pi provides durability and maximum thermal efficiency that exceed the requirements of Document L, available in sliding patio and rebated doors. Comar 7 is a commercial door system available in all configurations and Comar 7 High Performance 'Tempest' is a rebated door with exceptional weather performance.

Features of the Comar 7 Range:

 

COMAR 7 integrates into Comar's ground floor treatment, curtain walling suites and couples to window suites to provide fixed and opening fan and side light options COMAR 7 doors have exceeded the requirements of BS 6375 reporting no leakage at 1200 pa.

Aluminium Doors Comar 7

  • One of the most extensive range of commercial door configurations available to the market.
  • The range includes:
    • Swing Doors
    • Pivot Doors
    • Sliding Doors
    • Sliding/Folding Doors
    • Rebated Doors
    • Vehicle Access Doors
  • Full integration with Comar 2 window walling, Comar 5 window systems and Comar 6 curtain walling.
  • Special profiles allow the doors to be hung on transom closers directly onto Comar 2 window walling and Comar 6 curtain walling.
  • Glazing from 4mm to 40mm thickness.
  • Multiple brush seals ensure excellent weather tightness.
  • Tested to BS 6375 passed required 600 Pascal pressure differential/water penetration test. Pressure equalisation increased to 1200 Pascal's with 'no leakage'.
  • Construction:
    • Bolted & Screwed
    • Externally Bolted
    • Welded
    • Tie Rod
    • Glued & Pinned
  • A wide range of thresholds for applications including disabled access, drained and rebated doors.
  • Single door leaf sizes can be manufactured up to 1200mm wide and 2300mm high.  Dependent on the size and configuration larger or smaller sizes can be achieved, please contact Comar's Technical Department for project-by-project advice.
  • Comar 7 conforms to relevant industry standards, such as BS 7950 and, where applicable, PAS 24.
  • Comar 7 sliding doors with door beams provide an automatic door solution.
  • A variety of automatic door beams accept most major manufacturers bolt-on automatic door gearing.
  • Automatic door guide rail channels keep the door in alignment with double brush seals that increase weather performance.

Aluminium Doors Comar 7P.i. Energy Efficient

Part L legislation, has created a challenge for all system companies. Comar decided to research the requirements of the market before launching a system. Rather than just meeting the legislation, Comar have designed Comar 7Pi, to take into account the needs of the users of polyamide systems, now & in the future.

The user's could be the designing architects, who cares about aesthetics and true trade off U-values, the fabricator who wants systems that are economical, easy to fabricate and delivered on time and finally the end user who wants a building that will stand the test of time.

  • Designed to exceed the requirements of Approved Document L1 & L2.
  • 65mm profile width.
  • To ensure weather performance and energy efficiency Comar 7p.i. is available in single action hinged or rebated opening in or out.
  • Mill & standard white finish available ex-stock.
  • Dual colour delivered in 15 working days.
  • Fully certified training courses.
  • Full project-by-project technical back up.
  • Fully integrates into existing systems.
  • Designed to meet CWCT, BS & EN standards.
  • Dual weather seal.
  • High weather rating.
  • Utilises standard hardware.
  • Incorporates AXIM floor & face closers, panic exit devices & automatic closers.
  • Punch tooling to allow speedy fabrication.
  • Flexible system: can be used to create side and fan lights.
  • Double Rebated.
  • Nationwide approved polyamide fabricators.
  • Project-by-project U-value calculation.
  • Glass & panel thickness up to 54mm.

 

Aluminium Doors Comar 7 P.i HSD Patio Sliding Doors

  • Incorporates trade-marked P.. thermal efficiency
  • Polyamide or aluminium track
  • Reninforced tandem rollers with precision adjustment, ensuring long term ease of maintenance and operation
  • The rollers are tested to 200,000 open/close cycles
  • Strong and robust: up to 180Kg per roller
  • Weathering achieved by an integral plastic fin and bubble gaskets at the interlock
  • Dual colour
  • 5 Point locking
  • 2 or 3 track slider, creating the option for up to 6 sliding panes
  • Glazing of glass or panels up to 29mm
  • Fully integration into all Comar systems

 

[Valid XHTML 1.0 Transitional]